Emecole's Injection Packers, also known as mechanical packers, are suitable for repairing cracked foundations using high pressure injection -- typically at 1,000 to 10,000 psi. Injection Packers are placed in holes drilled at 45 degrees to intersect the interior of the crack.
Drill in place packers are used with a grease gun to get concrete crack injection materials into a concrete crack. Use for concrete cracks that are actively leaking water or have been previously repaired.
The size of the packer depends on the depth of the crack to be injected and the volume of material needed. For the typical concrete foundation up to 16" thick, 3/8" and 5/8" diameters work the best. For the typical concrete foundation up to 16" thick, 3/8" and 5/8" diameters work the best.
concrete repair in india, Flat Button Head Injection Packer in Delhi,Plastic Injection Packer in Delhi,Steel flat button head injection packers,Crack, resin, mechanical, epoxy injection pump, high pressure grout pump injection packers and suppliers in Delhi, India
Materials include concrete crack injection urethanes, epoxies, sealers, battery backup pump systems, and crawlspace encapsulation products. Everseal 6000 is a professional injection pump for dispensing urethane grouts under high pressure using metal injection packers. Light w eight and easy to handle for small to medium size jobs. It is excellent for concrete crack injection …
concrete crack injection packer Epoxy concrete crack injection materials - Applied Technologies Applied Technologies has been manufacturing and supplying epoxy concrete crack injection materials used in repairing foundation and basement wall cracks since 1998.
Concrete crack repair products are used by contractors and professionals for foundation crack and slab repair. High pressure pumps, packers and injection chemicals. High pressure pumps, packers and injection chemicals.
concrete at the required spacing, depth and angle to intercept the crack in the concrete or to protrude out the back of the concrete in some cases. The Packer is then placed in the hole and tightened with a wrench to expand the rubber or plastic sleeve. This seals the opening to prevent any injection materials from leaking out. Because the seal is tight around the packer, much higher injection ...
For concrete injection, typically the 3/8" (10mm), 1/2" (13mm) and 5/8" (16mm) packers seem to be the best compromise in strength and size and can be called a standard. Long versions and extensions are also available.
Infrastructure, Concrete Repair, Protection and Waterproofing Technologies SealBoss ® Corp. International Specialty Construction Product Systems, Geo Technical Products, and Equipment for infrastructure and geotechnical applications.
High Pressure Crack Injection System Pressure Injection Techniques can be used for injecting cracks, cold joints, and for soil stabilization. The system can be used to stop gushing water, to seal minor seepage, to re gain structural integrity and to waterproof and strengthen almost any concrete or masonry structure from the positive or negative …
DESCRIPTION: Insertable crack injection packers are also called mechanical packers. These are used in high pressure concrete crack injection situations, typically up to 1000 psi. They can be used for both epoxy or polyurethane grout injections.